Gas Line Services in Angier, NC

Warning signs worth a call

• The sulfur or rotten-egg odor that utilities add to natural gas. Leave first and make the call from outdoors.
• A faint hiss at the meter, a valve or the back of an appliance
• Range or furnace flames that look lazy and yellow rather than crisp and blue
• A water heater pilot that won't stay lit
• Dark staining around a burner, draft hood or vent pipe
• Dead grass or bubbling in a wet patch along a buried line's path

Anything on this list besides the smell is not a reason to evacuate, but it is a reason to have the piping and the appliance looked at before it gets worse.

How gas service works in Angier

Angier sits mostly in northern Harnett County, and a 2014 North Carolina Utilities Commission report lists all of Harnett in Piedmont Natural Gas's service area. A small slice of town lies in Wake County, which that report does not list for Piedmont, so if your address is on the Wake side, confirm the provider on your bill. In either case, whether a main actually runs down your street is something only the utility can confirm.

The housing mix matters here. Roughly 31% of Angier homes were built before 1980, according to Census survey figures, which is an older share than in nearby Holly Springs or Fuquay-Varina. Those older houses around the NC 55 and NC 210 crossroads are where you're more likely to find black iron piping that has been tapped and extended over the decades. Homes from the growth after 2000 more often use flexible corrugated stainless steel tubing (CSST), which needs proper bonding.

Cost drivers for gas piping jobs

• Distance from the meter. A range across the house from the meter needs more pipe and more labor than a dryer on the same wall.
• Access. A crawl space with room to work is quicker than fishing pipe through finished walls.
• Sizing. Adding a high-demand appliance, such as a tankless water heater, can mean the main trunk line has to be upsized.
• Trenching. Any buried run to a shop or outbuilding adds digging and backfill.
• Testing and inspection. New piping is pressure tested and inspected before the gas is opened.

Once you're connected

The call goes to an independent plumber who handles gas work in the Angier area. Be ready to say which appliance is involved, where your meter sits and whether you need new pipe or a repair. Inside town, building permits are applied for at Town Hall through Angier Planning & Inspections, and inspections are booked by phone; the plumber can tell you what the job requires.